Dorm-Air-Conditioner-Smart-Controller/ir_control.cpp

#include "ir_control.h"

void initIRControl() {
    pinMode(IR_RECEIVE_PIN, INPUT);
    pinMode(IR_SEND_PIN, OUTPUT);
    digitalWrite(IR_SEND_PIN, LOW);
    
    Serial.println("红外控制模块初始化完成");
    Serial.print("接收引脚: ");
    Serial.println(IR_RECEIVE_PIN);
    Serial.print("发送引脚: ");
    Serial.println(IR_SEND_PIN);
}

bool checkIRSignalStart() {
    return (digitalRead(IR_RECEIVE_PIN) == LOW);
}

IRSignal receiveIRSignal() {
    IRSignal signal;
    signal.data = nullptr;
    signal.length = 0;
    signal.isValid = false;
    
    Serial.println("开始接收红外信号...");
    
    // 分配内存存储信号数据
    signal.data = (unsigned int*)malloc(MAX_SIGNAL_LENGTH * sizeof(unsigned int));
    if (signal.data == nullptr) {
        Serial.println("内存分配失败");
        return signal;
    }
    
    unsigned long startTime = micros();
    unsigned long lastChange = startTime;
    bool currentState = HIGH;
    bool lastState = HIGH;
    
    // 等待信号开始（第一个低电平）
    while (digitalRead(IR_RECEIVE_PIN) == HIGH && (micros() - startTime) < RECEIVE_TIMEOUT_US) {
        delayMicroseconds(10);
    }
    
    if ((micros() - startTime) >= RECEIVE_TIMEOUT_US) {
        Serial.println("等待信号超时");
        free(signal.data);
        signal.data = nullptr;
        return signal;
    }
    
    Serial.println("检测到信号开始");
    lastChange = micros();
    lastState = LOW;
    signal.length = 0;
    
    // 接收信号数据
    while (signal.length < MAX_SIGNAL_LENGTH) {
        currentState = digitalRead(IR_RECEIVE_PIN);
        
        if (currentState != lastState) {
            // 状态改变，记录持续时间
            unsigned long duration = micros() - lastChange;
            signal.data[signal.length] = duration;
            signal.length++;
            
            lastState = currentState;
            lastChange = micros();
        }
        
        // 检查是否信号结束（高电平持续时间过长）
        if (currentState == HIGH && (micros() - lastChange) > SIGNAL_END_TIMEOUT_US) {
            Serial.println("检测到信号结束");
            break;
        }
        
        // 总体超时检查
        if ((micros() - startTime) > RECEIVE_TIMEOUT_US) {
            Serial.println("接收总体超时");
            break;
        }
    }
    
    if (signal.length > 0) {
        signal.isValid = true;
        Serial.print("信号接收成功，长度: ");
        Serial.println(signal.length);
        
        // 重新分配内存以节省空间
        signal.data = (unsigned int*)realloc(signal.data, signal.length * sizeof(unsigned int));
        if (signal.data == nullptr) {
            Serial.println("内存重新分配失败");
            signal.isValid = false;
            signal.length = 0;
        }
    } else {
        Serial.println("未接收到有效信号");
        free(signal.data);
        signal.data = nullptr;
    }
    
    return signal;
}

bool sendIRSignal(const IRSignal& signal) {
    if (!isValidIRSignal(signal)) {
        Serial.println("信号无效，无法发送");
        return false;
    }
    
    Serial.println("开始发送红外信号...");
    Serial.print("信号长度: ");
    Serial.println(signal.length);
    
    // 禁用中断以确保精确的时序
    noInterrupts();
    
    bool state = LOW; // 红外信号通常以低电平开始
    
    for (int i = 0; i < signal.length; i++) {
        digitalWrite(IR_SEND_PIN, state);
        delayMicroseconds(signal.data[i]);
        state = !state; // 切换状态
    }
    
    // 确保最后是低电平
    digitalWrite(IR_SEND_PIN, LOW);
    
    // 重新启用中断
    interrupts();
    
    Serial.println("信号发送完成");
    return true;
}

void freeIRSignal(IRSignal& signal) {
    if (signal.data != nullptr) {
        free(signal.data);
        signal.data = nullptr;
    }
    signal.length = 0;
    signal.isValid = false;
}

IRSignal copyIRSignal(const IRSignal& source) {
    IRSignal copy;
    copy.data = nullptr;
    copy.length = 0;
    copy.isValid = false;
    
    if (!isValidIRSignal(source)) {
        return copy;
    }
    
    // 分配内存
    copy.data = (unsigned int*)malloc(source.length * sizeof(unsigned int));
    if (copy.data == nullptr) {
        Serial.println("复制信号时内存分配失败");
        return copy;
    }
    
    // 复制数据
    for (int i = 0; i < source.length; i++) {
        copy.data[i] = source.data[i];
    }
    
    copy.length = source.length;
    copy.isValid = true;
    
    return copy;
}

void printIRSignal(const IRSignal& signal, int maxPrint) {
    if (!isValidIRSignal(signal)) {
        Serial.println("信号无效，无法打印");
        return;
    }
    
    Serial.println("=== 红外信号数据 ===");
    Serial.print("信号长度: ");
    Serial.println(signal.length);
    Serial.print("信号有效: ");
    Serial.println(signal.isValid ? "是" : "否");
    
    int printCount = (maxPrint == 0) ? signal.length : min(maxPrint, signal.length);
    
    Serial.println("原始数据 (微秒):");
    for (int i = 0; i < printCount; i++) {
        Serial.print("Index ");
        Serial.print(i);
        Serial.print(": ");
        Serial.print(signal.data[i]);
        Serial.print(" us (");
        Serial.print((i % 2 == 0) ? "LOW" : "HIGH");
        Serial.println(")");
    }
    
    if (printCount < signal.length) {
        Serial.print("... 还有 ");
        Serial.print(signal.length - printCount);
        Serial.println(" 个数据点未显示");
    }
    
    Serial.println("==================");
}

bool isValidIRSignal(const IRSignal& signal) {
    return (signal.data != nullptr && signal.length > 0 && signal.isValid);
}